Spun Bonded Filter Cartridges

Spun bonded Filter Cartridges are made of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges available with core & without core version. The superior structure remains integral even under severe operating conditions and is no media migration. Polypropylene fibers are blown continuous on central molded core, without the need for binders, resins or lubricants.

Operation :
Unfiltered fluid passes through depth filter matrix , enables the progressive retention of finer particles, providing high efficiency, high dirt retention & filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

Wound Filter Cartridges

Filter concept wound cartridges are designed to meet the most demanding filtration duties. They offer an economic, compact, easily installed and maintained filtration system for removal of particulate removal from liquid. Filter concept wound cartridges are manufactured from a variety of carefully selected raw materials. From raw material to finished products filter concept are in control of the quality and filtration characteristcics.they are appreciated due to high dirt holding capacity and to the rugged construction which allow to face different application in liquid and gas filtration.

Operation :
Unfiltered fluid passes through depth filter matrix , enables the progressive retention of finer particles , providing high efficiency, high dirt retention & filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

Polypropylene Pleated Cartridges

A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside, thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs.

All components used in the manufacture are biologically safe, chemically inert and meet FDA and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications.

PTFE Cartridges

Filter concept's PTFE cartridges are made of poly tetrafluroethylene. PTFE are characterized by high chemical inertness. These are specifically designed for Sterile filtration applications of air & gas streams. They are certified bio safe, non pyrogenic & fully validated to pharmaceutical standard. PTFE and polypropylene the unique two materials used in cartridge manufacturing are chemically inert not shedding and biologically safe according to F.D.A., USP and EEC requirements for pharmaceutical and food contact use.

PES (Poly Ether Sulphone) Cartridges
Filter Concepc's PES cartridges are made of poly ethersulphone with uniform pore distribution to ensure maximum performance in bacterial retentions. Its upstream & down stream polyester support ensure resistance to pressure shocks. Polyethersulphone membrane is hydrophilic in nature; it allows easy integrity testing for all applications where daily controls are required. The membrane possesses broad chemical compatibilities & contains no surfactants.

Sintered Filter Cartridges

Sizes : 5'', 10'', 20'', 30'', 40'' (For Ø2.5'' & Custom Mode)

Micron Rating : 1, 5, 10, 25, 50
· Sintered Polypropylene
· Sintered Polystyrene
· Sintered Ceramic
· Sintered Polyethylene
Special Size are Also Available

Stainless Steel Cartridges

Speciality Cartridges

Modified cellulose-based filter material chemically bonds specifically with hydrocarbons and other pollutants such as dissolved and dispersed oils from water instantaneous adsorption, more effective than activated carbon 90 percent of total hydrocarbons are removed in a single pass for use in 20-inch jumbo filter housing.

Filter Bags

Filter concept's filter bags are manufactured for optimum filtration performance. They are made from carefully selected media developed specifications the process industry. Various types of media are used such as needle felt, monofilament and multi-filament. They are effective in removing solid particulate from liquids where large volumes of contamination are present or where high viscosity fluids must be filtered. They offer an effective solution to many filtration problems.

Operation :

Filtration takes place as the liquid flows the inside of the filter bag to the outside. Needle felt filter bags utilize the reliable mechanisms of depth filtration and have a high dirt holding capacity. Mesh filter bags utilize the well proven mechanisms of surface filtration and are effective in removing large solid particulate or agglomerates from the liquid flow.





Technical specifications :

• Sizes

Ø 4" x 10" Long, Ø 4" x 17" Long, Ø 7" x 17" Long, Ø 7" x 32" LongCustomized Sizes Are Available

• Filtration rating

1, 5 , 10 , 20 , 50 , 100 ,200 Micron

• Filter Media

Polypropylene Polyester Nylon HDPE Nomex, Ryton

• Configuration

Fused (welded), Stitched

• Types

Single layered, Multi Layered